how to fix peeling faux leather jacket This is a topic that many people are looking for. savegooglewave.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, savegooglewave.com would like to introduce to you Fix Peeling on Faux, Bonded or Bycast Leather !. Following along are instructions in the video below:
Video is going to show you how to fix peeling on faux bonded or by by cast leather okay so here we have actually a very common issue and this whats called peeling leather. We found a little scenario here this happens to be on a jacket but it happens to you know boots shoes purses leather furniture current whatever manufacturer uses this type of bonded material you can see how its just a very light peel. Okay now the way you would fix that is and the easy way is basically just with our leather dies our leather dies actually double as a glue okay this is a black a okay this was the original color of the jacket since this is you know somewhat faded and you know over the years.
It has a little bit of like a little bit of like a brown hue to it. But were gonna use a black egg. Because that was the original color jacket.
I dont really think youre gonna notice that much of a difference but just simply were gonna show you how to fix this up just with the dye and then were gonna check it out and if we need a filler. Were going to apply a little bit of our leather filler into the area needed. If if we need it at all lets see well how good of a job.
We can do just with the dye. So well be back in a minute okay so were back we got our gloves on youre gonna youre gonna get the bottle of dye youre gonna put the lock top cap on it youre gonna shake it up and if you were to have any bubbling or anything like that sometimes people get a pin and poke into the bubbling. And then apply the dyes and push the dyes down in through those little holes that you push and you can potentially glue.
Bubbled areas down before they peel. Because the first thing thats gonna happen is its going to sort of bubble. Theres going to be loss of adhesion from this polyurethane to the backing and then through aggression or through rubbing or whatever youre gonna break that bubbled area open and then its going to peel.
Just like this as you can see can you see that or do we need to zoom in a little bit more maybe we can zoom in in just a little bit more here okay. There now its really zoomed in so the easiest way to do. This is get your dye.
Apply some dye to the area and open up those peeled areas to try to get it underneath. The peeled areas so were opening it up or just opening up the peeled areas just like that okay now try to you want to make sure you always get the dye underneath the peeled area very important so now were gonna potentially those flaps are gonna be glued down with our dyes hopefully you can see this okay were getting there okay okay just make sure try to get all those flaps down sort of glued down like this and let them sit overnight and were gonna see what we have the next day. Okay that looks pretty flat flat see sometimes its wrinkled a little bit try to make it all nice and flat and even while this is drying and curing you can go ahead and sort of press those those peeled areas down.
So were just gonna let this sit. And well be back you know you know what we might even try to dry. It a little bit you know with our hairdryer.
So we can make sure that all those peeled and flat areas are glued perfectly straight. So we back in a minute okay were back were just drawing this area up. We use a heat gun.
But we recommend you use a hairdryer. Okay so now we can see a little bit better. Whats going on here.
Well zoom back in again. So. This area is the area where there is a missing peel in this area.
Here. You can still see that theres like stress.
Cracking and everything so that means this area. Here. We actually want to apply more dye and we just want to let it soak down into that area and here to apply some more dye and let it soak down into that area and here let it soak down into that area and you can even put the dye.
Oh you know you can puddle. It a little bit there. If you want so theres a good amount of dye inside here so since we have the dye in fairly thick.
You can even put a couple drops into that area where there was actually no peel. There was missing missing finish right here. As you can see see right there and right here.
Where theres a crack. Were gonna put a little bit more dye okay were just gonna flood that area a little bit and where there was a little bit more cracking or i need a little bit more help were gonna sort of flood that area okay so what were gonna do is were gonna let this dry overnight and then were gonna show you what it looks like the next day. Well be back okay so we are back the next day.
And as you can see here this peeled area has all been glued down with just our dyes. So lets check it out lets test it out here can we go like this can we roll it between our fingers can we do all kinds of stuff you can see the strength in it can you see the strength in it there okay now if in fact your couch. Just had peeling you could effectively glue them all down just like this.
And as you can see this is this is really the real deal here like this is actually fixing this its not opening up again. But right here or you can see that the peel has bit is actually missing. And if you look really closely here you can see some stress cracking.
What we want to do is we want to fill that in and the way we would fill that in of course is with our leather repair filler right here the kit okay it comes with of course. Lets zoom out lets zoom out a little bit. So we can see what we have here we have of course.
The instructions and the packing slip. We have the sandpaper if we need to sand it down. We dont necessarily need the sandpaper you have the rubber gloves and you have the leather repair cloth so if you did happen to have a rip you would cut the cloth.
You would feed that within the rip. And you would apply the filler in the rip and sort of glue it down okay and then of course you would let it dry overnight. Then the next day.
We put a nice little thin skin coat over top of it which is basically what im gonna show you now and then youd have a nice repair right here of course is the leather repair filler really good stuff okay and youre gonna see the consistency of it whoops. Theres the consistency of it right there theres the filler so were gonna take the filler and were gonna try to correct that area where we have this peeling or this peeled off area. Were gonna try to make that look better can we see that on the camera okay so were just gonna take a little bit of filler thats all you really need you dont need much and were basically just going to lay it on there like that no big deal and youre just gonna spread it in and what you want to do here is you dont want to apply a thick coat like that because then people are gonna say oh my god look the grain is gone and all this stuff you want to apply it in there and then you just want to scrape it off like this so youre leaving the grain intact to a certain degree you know nothings perfect here were doing a repair perfect repairs are the pretty ones that look great that dont really last and the really ugly repairs are the ones that look terrible.
But they last forever thats just the way it is so what we want to do is we want something in the middle. We want to fix the area so it doesnt open again the majority of customers. I mean again.
We dont sell the products were leather refinishing specialists and in our years of business since 1898. I mean im fourth generation.
And ive been in this game for about 25 years. The majority of customers want something that theyre gonna pay for thats gonna last and its a bonus if it looks nice or really good. But if you make something that looks really good thats not gonna last youre gonna have the problem.
So thats our way of thinking so right here you can see the little inconsistencies and you can apply the filler in there and you just sort of scrape it off okay you just sort of scrape it off just like that now this little thin coat in here. You know if we put a hairdryer on it or something like that i mean we use heat guns. But with heat and not everyones got a heat gun and theyre pretty hot and you can burn things pretty quick with a heat gun.
But a hairdryer everyone has available to be availability to a hairdryer. Most people and if you just put that on here for about two or three minutes. That should be good enough okay just a very very thin skin cool like this.
I mean we have the heat on here in the shop and whoa inaudible 75 degrees. And i can already tell this is already you know curing up on us. So what were going to do is were going to dry this up a little bit and then were gonna start to lay the dies on so a really thin skin coat like this you could probably get away with maybe.
A couple hours. You know under normal circumstances for it to just air dry or if you have a heat gun or well you dont hairdryer of course. If you put the hairdryer right on that for about two or three minutes.
It would probably be good enough to start to apply the dyes on so were gonna dry this up well be back in a minute okay so were back this area here. We dried. It up really really well with the hairdryer and we left it on all about an hour or two and as you can see and feel.
Theres strength in that and i do believe that the majority of the moisture. Thats in the filler has migrated up or evaporated or dried up whatever you want to call it so. What you want to do is feel it so if its rough you know you what you want to do is go into your kit and get your sandpaper and i mean this doesnt really need to be sanded.
But im gonna show you how to send it just in case it did need to be sanded. You dont want to rub on the scrub and do all that kind of stuff and make more damages. What you want to do is you just want to gently see gently sand.
It all youre looking for is to see if its smooth you want to put your hand in well with the jacket. You can put your hand underneath. It with a couch.
It would just sort of be sitting there and you just be gently doing this and what you want to look for or feel is that its nice and smooth and it pretty well is nice and smooth alright so just dust that area off just to make sure. Its free and clear of any sort of you know pieces of the filler or what have you from your work you want to get your dye. It up and now we want to put some dye over top of this again this was a bonded or by cast the leather jacket thats fairly old has been faded out and its starting to look a little bit brownish.
Its got a little bit of a brownish hue. But it is a black a color okay. Which is like a charcoal or a graphite okay.
But when black fades sometimes it fades to like a purplish hue or a brownish shoe or something like that so if some people are saying on the video. While that doesnt match well.
All you have to do is put a thin coat into the whole panel. Just like this seem like that and just sort of blend it in and when that dries its gonna look beautiful and if you want to you could apply it over the whole coat and youd pretty much have a brand spanking new coat again. But lets see what we can do with the dye you can put it on like that and you can sort of dab.
It on or you can put it on to the sponge. So you have control over it youre not gonna make a mess. And you can just sort of dab it on like this okay very easy to work with apply it let it dry apply it let it dry apply it let it dry okay.
When you wipe it on youre putting on thin coats. When you dab it on youre putting on thicker coats. So what were gonna do is were gonna dry it in real time.
I have a heat gun and we always put our hand down near the repair. When youre dealing with a heat gun. Because if you can burn your hand you can burn the material.
So with a hairdryer. You dont have those problems okay so it was shiny and now as its drying of course. It is looking a little bit more matte.
Okay so thats pretty good now. Lets put a glove on maybe. I dont want to get style over my hands and put a couple more drops on there and now were gonna wipe a little bit more dye into the rest of the panel.
So it matches. So it blends in okay just like that very simple very easy. I mean you cant really get much simpler than that and you want to dry this up okay now with the filler.
The fillers white. So although this looks good i would probably recommend putting about two to three coats of the dye over top of the filler to hold that totally hide the filler. So you wont get any ghosting.
If youre applying the dyes over top of the filler and if you dont have enough dyes over top of the filler. They will sort of kind and look a little bit hazy or white in those areas. That just means you just dont have enough dye on there so were gonna dab on another coat of the dye like this and then were going to go ahead and were gonna dry it again just like this music okay applause music now lets see what we have here so we glued down all the peel.
We put some filler in there and we put some dye over there what do we have now lets take a look at what do we have can you see what we have thats a pretty good repair thats a pretty nice repair you can see it see were showing you in highlight in glare. So you can see everything theres no imagination. You dont need to wonder about anything okay.
So now the way we would finish this off is of course. Nothing here is really 100 dried and cured. But with our dyes of course you know its not gonna come off in your hands.
I had some dye on there from not putting my gloves on but as you can see here my hand. If you go like this nothings coming off on it okay so to finish this to protect this area.
Since theres filler since theres died to protect that what you would do is you would go into your kit. Let me just adjust the camera and you would take the sealer right there cuz thats the top coat. And you would take the sprayer and you would open it up.
And you would just poke in there like that and you would put your sprayer in there just like this and then you would shake it up prime. It a little bit get yourself a sponge right here. A new sponge spray the sealer on to the sponge.
Lets get this flat so we can apply it and youre basically gonna wipe it in just like that okay and just to note if you if you load this up with sealer and you sort of wipe it on so its like glistening wet. Its gonna be shiny. But if you wipe it on like i did and then continue to wipe it while its sort of drawing youre gonna create more of a matte finish okay now were gonna dry this area applause okay and lets see what we have now can you see what we have we have a repaired area that was peeled.
Well probably put in a half and a half picture or something like that so you can see it. But there it is right there thats fixed and thats gonna have flexibility. I dont want to really push it too much right now because this is all dry to the touch.
But its not cured till overnight and when it perfectly cures overnight. Thats when you get the real strength and the flexibility so what well do i mean. This is a really nice repair and if its on your couch on a headrest area or armrest area sort like that no youre gonna be doing.
Its sort of putting your hand on or something nothings gonna have we like to test our finishes and all the rest of stuff. But nothings really gonna happen with that thats a really nice repair quick and easy and of course again. What this was was was our small leather die repair kit comes the cleaner the dye.
The sealer the gloves everything that you need and of course we filled it in with our leather repair filler kit okay in the kit of course you know exactly what you get but this these are the two most important things. The nice pallet knife for application of course. The filler and you can find this and many other products at leather touch up dicom.
Oh and one more little tip. Too. If you were to do a repair like this on your couch where youre gonna fix peeling or if youre gonna do anything like this and you were to apply the dyes and the sealer and everything over top of this.
Okay. Lets say a week later or two weeks later. You see something she should have put a little bit more filler right there with our products you can do that you can literally get your filler scoop out a little bit of filler apply.
It over top of the dies over top of the sealer just like this fill in the little areas that need it scrape it off let. It dry overnight and simply do it all over again apply that dies over top of the filler two or three coats. Make and look pretty and then apply the sealer over top and youre done.
And again. Even if you did that two or three weeks later there was another little area that was bugging yo. I should have put a little bit then you take the filler you put it into that little area you scrape it off let it dry and continue so with our products of tip is youre never really finished.
If you want to do a little bit of a better job or if you want to put a little bit more filler in there you dont have to strip anything down or do anything you just lay. It over top of the existing finish because of all of our products are whats called backwards compatible. You can apply the dyes or you can apply the filler over top of the filler over top of the dies.
First afterwards doesnt matter as long as its dried and cured and clean you can apply the filler and and and redo that again so i thought that was a good tip again you can find this and many other products at leather touch up dicom well we hope you enjoyed the video and if you did please like subscribe or even share with your friends. .
Thank you for watching all the articles on the topic Fix Peeling on Faux, Bonded or Bycast Leather !. All shares of savegooglewave.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.